HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2 administrator guide (5697-0 - Page 250
Adding devices members to a zone, Removing devices members from a zone
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
3. Enter the cfgSave command to save the change to the defined configuration: switch:admin> zonecreate "greenzone", "2,32; 2,33; 2,34; 4,4" switch:admin> zonecreate "bluezone", "21:00:00:20:37:0c:66:23; 4,3" switch:admin> zonecreate "broadcast", "1,2; 2,33; 2,34" switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on the Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y The cfgSave command ends and commits the current zoning transaction buffer to both volatile and nonvolatile memory. If a transaction is open on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message is displayed on the other switches to indicate that the transaction was aborted. Adding devices (members) to a zone 1. Connect to the switch and log in as admin. 2. Enter the zoneAdd command, using the following syntax: zoneadd "zonename", "member[; member...]" where: zonename member The name of the zone. A member or list of members to be added to the zone. A zone member can be specified by one or more of the following methods: • A domain,port pair • A device node or device port WWN • A zone alias name 3. Enter the cfgSave command to save the change to the defined configuration: switch:admin> zoneadd "greenzone", "1,2" switch:admin> zoneadd "bluezone", "21:00:00:20:37:0c:72:51" switch:admin> zoneadd "broadcast", "1,3" switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on the Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y The cfgSave command ends and commits the current zoning transaction buffer to both volatile and nonvolatile memory. If a transaction is open on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message is displayed on the other switches to indicate that the transaction was aborted. Removing devices (members) from a zone 1. Connect to the switch and log in as admin. 2. Enter the zoneRemove command, using the following syntax: zoneremove "zonename", "member[; member...]" 248 Administering advanced zoning