Brother International ZE-856A Instruction Manual - English and Spanish - Page 102
Setting the zigzag stop position
View all Brother International ZE-856A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
7. USING THE OPERATION PANEL 7. VERWENDUNG DER BEDIENUNGSTAFEL 7. UTILISATION DU PANNEAU DE COMMANDE 7. USO DEL TABLERO DE CONTROLES 7-2-4. Setting the zigzag stop position When the plain zigzag, 2-step zigzag, 3-step zigzag or scallop sewing patterns are selected, you can set whether the needle stops when it is at the right side or the left side of the sewing pattern. (If the right stopping has been set, the needle stop position will be the position shown by n in the illustration below.) * When the straight stitch, blind stitch or custom-made sewing patterns have been selected, the zigzag stop position setting is ignored. I Sewing machine operation when sewing stops When right stopping or left stopping is set, the sewing machine will keep running until the set position is reached, even if the treadle is returned to the neutral position or depressed backward. • For plain zigzag, 2-step zigzag and 3-step zigzag, the needle will stop at the stitch furthest to the right if right stopping has been set, or at the stitch furthest to the left if left stopping has been set. • For the scallop sewing pattern, the needle will stop at the next right-side stitch if right stopping has been set, or at the next left-side stitch if left stopping has been set. Treadle stopped * When the needle stops in the needle up stop position, the last stitch does not form part of the seam. If the treadle is depressed backward at this time, the seam is formed at that position. (Stop) Plain zigzag 3-step zigzag OFF OFF q No position specified ON OFF Left stopping Scallop 1342M I Setting method Press the zigzag stop position key q to set the needle stop position. • The indicator illumination changes as shown in the il- lustration at left and the zigzag stop position setting changes each time the zigzag stop position key q is pressed. • If right stopping or left stopping has been set, the indicator also illuminates during sewing so that you can check the setting. OFF ON Right stopping 1440M I Sewing start position after the treadle is depressed backward When right stopping has been set, sewing starts from the right side. When left stopping has been set, sewing starts from the left side. • If the needle stops in the needle down stop position, the needle will be raised to the needle up stop position when the treadle is depressed backward. (The workpiece can then be changed.) The next sewing operation starts from the same position. Note: Do not press the half stitch key or correction key or turn the machine pulley by hand to move the needle to the needle up stop position. Doing so will cancel the effect of the zigzag stop position function. Furthermore, the effect of starting the next sewing from the zigzag stop position will also be canceled when DIP switch 2-4 is set to ON. 83 ZE-855A,856A