Brother International ZE-856A Instruction Manual - English and Spanish - Page 135

uy tr Start point/end point (Automatic thread trimming) E F 1472M 7. USING THE OPERATION PANEL 7. VERWENDUNG DER BEDIENUNGSTAFEL 7. UTILISATION DU PANNEAU DE COMMANDE 7. USO DEL TABLERO DE CONTROLES I Automatic thread trimming function (856A only) • When setting fixed stitch/name label sewing, if the thread trimming key r is pressed so that the indicator t illuminates, the thread is trimmed automatically after the set number of stitches have been sewn when the treadle is depressed continuously. (When attaching name labels, the thread is trimmed after each cycle.) • When the fixed stitch/name label function is canceled, the automatic thread trimming function is also canceled, and the thread trimming indicator t switches off. I Automatic sewing (AUTO) function • When setting fixed stitch/name label sewing, if the AUTO key y is pressed so that the AUTO indicator u illuminates, the number of setting stitches is sewn automatically simply by depressing the treadle once. • When the fixed stitch/name label function is canceled, the AUTO function is also canceled, and the AUTO indicator u switches off. E E F (Automatic thread timing) 1367M 1368M Start backtack zigzag width Number of start backtack stitches I Combining fixed stitches/name label sewing with backtacking The illustration shows an example of stitch combinations using backtacking. Note: The set number of fixed stitches are sewn and sewing then stops automatically, regardless of the zigzag stop position setting. E= Number of fixed E= stitches Number of end backtack stitches End backtack zigzag width 1369M ZE-855A,856A 116