Brother International ZE-856A Instruction Manual - English and Spanish - Page 192

13. STANDARD ADJUSTMENTS 13. STANDARDEINSTELLUNGEN 13. REGLAGES STANDARD 13. AJUSTES ESTANDARES The L mark indicates factory default settings. I DIPSW1 No. Function Operation when OFF Operation when ON 1 Treadle specifications Domestic Japan L Export 2 (Spare) L Do not set to ON Do not set to ON 3 Automatic presser lifter L Not used Used 4 (Spare) L Do not set to ON Do not set to ON 5 Motor operation when "UP" displayed L Does not operate (turning by hand only) Operates (treadle depressed backwards, half stitch key) 6 Maximum sewing speed limit Table 1 below Table 1 below 7 Maximum sewing speed limit Table 1 below Table 1 below 8 Maximum sewing speed limit Table 1 below Table 1 below (Table 1) maximum sewing speed limit (rpm) DIPSW1-6 DIPSW1-7 DIPSW1-8 Maximum sewing speed OFF OFF OFF 1000 ON OFF OFF 2000 OFF ON OFF 2500 ON ON OFF 3000 OFF OFF ON 3500 ON OFF ON 4000 L OFF L ON L ON L 4500 ON ON ON 5000 I DIPSW2 No. Function Operation when OFF Operation when ON 1 Zigzag width limit Table 2 below Table 2 below 2 Zigzag width limit Table 2 below Table 2 below 3 4 .5 Sewing start position L Table 3 below Needle zigzagging when treadle is depressed backward L OFF Backtack zigzag width setting Enabled Table 3 below ON L Disabled 6 Voltage specifications 220V, 230V, 240V, 380V, 400V 110V 7 (Spare) L Do not set to ON Do not set to ON 8 Panel key lock L Not locked Locked (Except for counter ĦĤ keys and counter reset key.) * * ... When the panel is locked, AA AA is displayed at all times. (Table 2) Zigzag width limit DIPSW2-1 DIPSW2-2 Maximum zigzag width ON ON 10mm L ON L OFF L 8mm OFF ON 5mm OFF OFF 3mm (Table 3) Sewing start position when power is turned on and after setting memory switches Zigzag stop position DIPSW2-3 L OFF Å£ON Left stopping Left Right No position specified Left Right Right stopping Right Left 173 ZE-855A,856A