Brother International ZE-856A Instruction Manual - English and Spanish - Page 59
Nadelzickzack beim Zur
View all Brother International ZE-856A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
5. INSTALLATION 5. MONTAGE 5. INSTALLATION 5. INSTALACION G Needle zigzagging function when the treadle is depressed backward (additional DIP switch function) G Nadelzickzack beim Zurückdrücken des Pedals (zusätzliche DIP-Schalterfunktion) Example: Plain zigzag Beispiel: Normale Zickzackstiche With needle zigzagging on Nadelzickzack eingeschaltet Sewing direction Nährichtung With needle zigzagging off Nadelzickzack ausgeschaltet Treadle depressed backward Pedal zurückgedrückt Next sewing start Nächster Nähbeginn 1416M (Be sure to turn off the power before changing any of the DIP switch settings. Refer to page 171.) When DIP switch 2-4 inside the control box is set to ON, needle zigzagging also occurs when the treadle is depressed backward. (Reference example) DIPSW2-4: ON For the 855A, this sets needle zigzagging to ON if you would like to prevent a flattened zigzag from being sewn if the treadle is depressed backward by mistake. DIPSW2-4: OFF This sets needle zigzagging to OFF if you would like the sewing end and the next sewing start to be at the same position such as when a zigzag stop position has been set. (Zum Ändern von DIP-Schaltereinstellungen muß die Maschine ausgeschaltet werden. Siehe Seite 171.) Wenn der DIP-Schalter 2-4 im Schaltkasten auf "ON" gestellt ist, so wird beim Zurückdrücken des Pedals der Nadelzickzack eingeschaltet. (Beispiel) DIPSW2-4: ON Damit wird der Nadelzickzack für die 855A eingeschaltet, um zu vermeiden, daß beim irrtümlichen Zurückdrücken des Pedals ein flacher Zickzack genäht wird. DIPSW2-4: OFF Damit wird der Nadelzickzack ausgeschaltet, so daß das Nähende auf den nächsten Nähbeginn ausgerichtet ist, wenn die Stopposition für den Zickzack eingestellt ist. ZE-855A,856A 40