Brother International PS-300B Instruction Manual - English - Page 131
To separate a design element at a point Modify-Point-Split, Modify, Point, Split, Select Point
View all Brother International PS-300B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
The selected point changes to a black circle. NOTE: The Add command is available only if a point that is not at the end of a design element is selected. 2. Do one of the following: On the Modify drop-down menu, click Point. On the Point sub- menu, click Add. Right-click to display the context menu, and then click Add. A new point is added in the center position between the specified and next points. NOTE: If you try to add a point on an arc, two other points are automatically added to both sides of the specified point to maintain the shape of the arc. You cannot add a point on a circle or an ellipse. To separate a design element at a point (Modify-Point-Split, ): With the Split command, you can split a design element at individual points, allowing it to be split or edited. This operation changes an open outline to two open outlines, and a closed outline to an open outline. 1. Using the Select Point tool or Select Punch Point tool , select the point where you want to split the design element. The selected point changes to a black circle . NOTE: The Split command is available only if a point that is not at the end of a design element is selected. 2. Do one of the following: On the Modify drop-down menu, click Point. On the Point sub- menu, click Split. 131/164