Brother International PS-300B Instruction Manual - English - Page 91
Selecting commands for drawing the desired outlines
View all Brother International PS-300B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Cancel Click this button to cancel the values you have inputted in this dialog box. NOTE: The right side in horizontal direction is positive, the left negative; the upper part in the vertical direction is positive, the lower negative. As for angles, the horizontal line (the X axis) indicates 0°, angles in the clockwise direction are 0 to 360°, and angles in the counterclockwise direction are 0 to -360°. When you have made the settings that conflict, PS-300B automatically applies the values in the following priority. 1. X and Y-coordinates 2. X-coordinate + Angle 3. Y-coordinate + Angle 4. Length + Angle 5. Repeat step 2 or 3-4 to add more points to the outline. NOTE: To delete the last inputted point, press the keyboard's Backspace or Space key. To delete all points, press the keyboard's Esc key. 6. After specifying the last point in the outline, right-click once to finish the outline. The start point marker ("S") and end point marker ("E") for the outline appear. NOTE: To close an outline connecting the end point to the start point, click Close Outline on the Shape drop-down menu or click the Close icon in the toolbar before finishing the outline. 7. Repeat steps 1 to 6 to draw more outlines. The end point of the previous outline and the start point of the current outline are connected with a feed or a stitch that is specified in Property on the View drop-down menu. NOTE: To create another outline linked with the current outline, click Continue on the Shape drop-down menu or click the Continue icon in the toolbar before finishing the current outline. 3-2-2. Selecting commands for drawing the desired outlines To draw a straight line (Shape-Straight Line, ): 1. Do one of the following: On the Shape drop-down menu, click Straight Line . Click the Straight Line icon in the toolbar. When the pointer is moved into the design area, its shape changes to . 2. In the design area, specify the desired location for the start point of the straight line (1 in the figure below). 91/164