Brother International PS-300B Instruction Manual - English - Page 157

Trace, Pitch, Margin, Import From, Export To, Machine, FD-300 Com Port, CF Drive, PRW-1SW-1 Com Port - software manual

Get Brother International PS-300B PDF manuals and user guides View all Brother International PS-300B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 157 highlights

Trace Import From /Export To Machine Scale dialog box. NOTE: If the connection length exceeds the maximum stitch length, it will be automatically changed to a feed. (Software default: the maximum stitch length) Specify the settings for the Trace tool. Pitch: Type the desired value in the box to change the pitch for manual stitches created with the Trace tool. (Setting range: 0.05 to 12.7 mm, software default: 0.2 mm) Margin: Type the desired value in the box to change the precision for tracing with the Trace tool. (Setting range: 0.0 to 1.0, software default: 0.2 mm) NOTE: If the trace pitch is less than 2.0 mm, the setting range will be 0.0 to half of the pitch. Specify settings for floppy disk drive FD-300, ROM writer PRW-1, and the drive for CF card writer. FD-300 Com Port: Select the desired COM port for floppy disk drive FD300 from the Com Port list box. CF Drive: Select the drive connecting with the CF (Compact Flash) writer from the CF Drive list box. (The A and C drives cannot be selected.) PRW-1(SW-1) Com Port: Select the desired COM port for ROM writer PRW-1 from the Com Port list box. PRW-1(SW-1) Baudrate: Select the desired baud rate for ROM writer PRW-1 from the Baudrate list box. (Software default: 115200 bps) ROM File: Check this box to convert a ROM file in the MOT format when exporting it to a ROM writer, so that you can write the ROM file to a ROM writer which is not the PRW-1. NOTE: To find the COM port, click the Windows' Start button, and then click Control Panel. In Control Panel, double -click the System icon, click the Hardware tab, and then click the Device Manager button. In the Device Manager dialog box, click a plus sign to the left of Ports (COM & LPT), and then check the COM port number of the floppy disk drive (FD-300) and the ROM writer (PRW-1(SW-1)). Set the resolution for displaying the design area. [Setting range: 0.005 to 0.05 mm, software default: 0.025 mm (This means 157/164

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
157/164
dialog box
.
NOTE:
If the connection length exceeds the maximum stitch length, it will be
automatically changed to a feed.
(Software default: the maximum stitch length)
Trace
Specify the settings for the
Trace
tool.
Pitch:
Type the desired value in the box to change the pitch for manual stitches
created with the
Trace
tool.
(Setting range: 0.05 to 12.7 mm, software default: 0.2 mm)
Margin:
Type the desired value in the box to change the precision for tracing with the
Trace
tool.
(Setting range: 0.0 to 1.0, software default: 0.2 mm)
NOTE:
If the trace pitch is less than 2.0 mm, the setting range will be 0.0 to half of
the pitch.
Import From
/Export To
Machine
Specify settings for floppy disk drive FD-300, ROM writer PRW-1, and the
drive for CF card writer.
FD-300 Com Port:
Select the desired COM port for floppy disk drive FD300 from the Com Port
list box.
CF Drive:
Select the drive connecting with the CF (Compact Flash) writer from the CF
Drive list box.
(The A and C drives cannot be selected.)
PRW-1(SW-1) Com Port:
Select the desired COM port for ROM writer PRW-1 from the Com Port list
box.
PRW-1(SW-1) Baudrate:
Select the desired baud rate for ROM writer PRW-1 from the Baudrate list
box.
(Software default: 115200 bps)
ROM File:
Check this box to convert a ROM file in the MOT format when exporting it
to a ROM writer,
so that you can write the ROM file to a ROM writer which
is not the PRW-1.
NOTE:
To find the COM port, click the Windows’ Start button, and then click
Control Panel. In Control Panel, double -click the System icon, click the
Hardware tab, and then click the Device Manager button. In the Device
Manager dialog box, click a plus sign to the left of Ports (COM & LPT), and
then check the COM port number of the floppy disk drive (FD-300) and the
ROM writer (PRW-1(SW-1)).
Scale
Set the resolution for displaying the design area.
[Setting range: 0.005 to 0.05 mm, software default: 0.025 mm (This means