Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 1033

TROUBLESHOOTING►GENERAL PROBLEMS TRANSMISSION TAKES A LONG TIME Check  Solution Is the resolution setting appropriate at the time of scanning? ■ Select resolution and data compression settings that are suited to the purpose of transmission. To create image data that is balanced in terms of resolution and file size, pay attention to the following points: Resolution modes: The default resolution setting is [200x200dpi] in "E-Mail", "FTP/Desktop", "Network Folder", and "Scan to External Memory Device", and [200x100dpi] in Internet fax mode. If the original does not contain a halftone image such as a photo or illustration, scanning at the default resolution will create a more practical and useful image. A higher resolution setting or the "Half Tone" setting (in Internet fax mode only) should only be selected if the original contains a photo and you wish to give priority to the quality of the photo image. Exercise caution in this case as a larger file will be created than when the default setting is used. A DESTINATION IS PRE-SELECTED Check Is [Default Address Setting] enabled in the setting mode?  Solution ■ If you wish to send to a destination other than the default destination, tap the [Cancel] key. If you are the administrator and wish to change or disable the default destination, change the settings as appropriate in [Default Address Setting].  "Settings (administrator)" → [System Settings] → [Image Send Settings] → [Scan Settings] → [Default Address] → [Default Address Setting] 10-50