Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 858

SETTING MODE►SYSTEM SETTINGS Auto Scan Setting Configure auto scan setting. Factory default settings:Disable Set Image Orientation Automatically The orientation of placed originals can be automatically detected. Set whether the original is scanned by one-sided scanning or two-sided scanning. Factory default settings: Enable Set Resolution Automatically You can have the machine automatically set the resolution. Factory default settings: Enable Blank Page Skip Set whether or not blank original pages are automatically skipped during scanning. Factory default settings:Blank Page Skip Automatically Detect Mono2/Grayscale Originals Automatically Detect Mono2/Grayscale. Factory default settings: Enable Detection Standard Automatically Detect Mono2/Grayscale. Factory default settings:3 (Normal) Automatically Adjust Skewed Original The tilt of the document is automatically corrected. Factory default settings:Enable When using the document feeder, the document size is automatically determined. The original size is automatically determined when the original is read by the automatic original feeder. Factory default settings:Enable If it is determined to be a business card, a business card information file is also created. If it is determined that the card is a business card based on the original size, the business card information is also saved using the OCR function. Factory default settings:Enable File Format of Card Info Set the file format of business card information. Factory default settings:vCard (*.vcf) Use Full Name on Card as the File Name The name of the business card is the name of the file that stores the business card information. Factory default settings:Enable Set Compression Ratio Automatically Automatically selects the best compression ratio from the original document. Factory default settings:Enable Preset restriction of E-mail for direct input Enable this setting to prohibit e-mail transmission to an address that has an unsuitable domain. A file will not be sent if the e-mail address is entered directly and the domain is one of the set domains. 9-84