Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 202

COPIER►BASIC PROCEDURE FOR MAKING COPIES 7 Repeat Layout OK Auto Layout of Repeat Face Based on Original, Paper Size and Ratio. Off Auto Repeat Fixed Repeat Photo Repeat Current Setting Original Paper Select Copy Ratio Layout Parting Line Auto A4 A3 100% Layout w/o spacing Off Repeat Number 1 • To cancel the Auto Repeat setting: Tap the [Off] key. • To cancel all settings: Tap the [CA] key. Specify the repeat partition line. After the settings are completed, tap [OK] key. 8 Tap the [Color Start] or [B/W Start] key to start copying. Copy by specifying a repeat count (Fixed Repeat) 1 Perform steps 1 to 3 in Copy by automatically calculating the repeat count (Auto Repeat) (page 3-53). 2 Tap the [Fixed Repeat] key. 3 Tap the [Original] and [Paper Select] keys to select an original size and a paper size, respectively. SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL (page 3-29) SELECTING THE PAPER TRAY FOR COPYING (page 3-13) 4 Repeat Layout OK No. of Faces OK 2 Repeat 4 Repeat 8 Repeat 16 Repeat Tap [No. of Faces] to set a repeat count. After the settings are completed, tap [OK] key. The automatic calculation result is shown as the copy ratio. If the calculated copy ratio exceeds the range from 25% to 400% (using document glass) or 25 to 200% (using automatic document feeder), an error occurs. 3-54