Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 25

BEFORE USING THE MACHINE►LOADING PAPER LOADING PAPER INTO THE BYPASS TRAY Use the bypass tray for printing on plain paper, envelopes, label sheets, tab paper, and other special media. Up to 100 sheets of paper can be loaded (Heavy paper weighing between 28 lbs. bond and 140 lbs. index (106 g/m2 and 256 g/m2): 40 sheets, heavy paper weighing between 140 lbs. index and 110 lbs. cover (257 g/m2 and 300 g/m2), transparency film, tab paper, and envelope: 20 sheets) for continuous printing, just like operation using other trays. • When using plain paper other than Sharp standard paper or special media other than SHARP-recommended transparency film, glossy paper, or when printing on the reverse side of paper that has been printed on one side, load paper one sheet at a time. Loading more than one sheet at a time will cause misfeeds. • Before loading paper, straighten any curling in the paper. • When adding paper, remove any paper remaining in the bypass tray, combine it with the paper to be added, and reload as a single stack. If paper is added without removing the remaining paper, a misfeed may result. Loading more sheets than the specified number of sheets or the limit may cause paper misfeeds. HOW TO LOAD THE PAPER Load paper up to 7-1/4" x 10-1/2" (A5) size in landscape orientation. LOADING TAB PAPER To print on tab paper, load tab paper into the bypass tray with the print side facing down. Side 2 • Use only tab paper that is made of paper. Tab paper made of a material other than paper (film, etc.) cannot be used. • To print on the tabs of tab paper: In copy mode, use [Tab Copy] in "Others". In print mode, use the tab print function. 1-22