Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 873

SETTING MODE►SYSTEM SETTINGS Send Setting These settings are used to configure the settings for Internet fax. I-Fax Reception Report On/Off Setting This setting is used to request a reception report when an Internet fax is sent. Factory default settings: Disable I-Fax Reception Report Request Timeout Setting The duration of time that the machine will wait for a reception report from the destination machine can be set by any number from 1 hour to 240 hours in increments of 1 minute. Factory default settings: 1 Hour This setting is only effective when "I-Fax Reception Report On/Off Setting (page 9-99)" is enabled. Number of Resend Times at Reception Error The number of resend attempts when an error message is received from an I-Fax recipient can be set to any number from 0 to 15. Factory default settings: 2 Time(s) This setting is only effective when "I-Fax Reception Report On/Off Setting (page 9-99)" is enabled. Maximum Size of Send Data To prevent the transmission of excessively large image files by Internet fax, a file size limit can be set from 1 MB to 99 MB in increments of 1 MB. If the total size of the image files created by scanning the original exceeds the limit, the image files are discarded. If you do not wish to set a limit, select [Unlimited]. Factory default settings: Unlimited This setting is linked to "Maximum Size of Send Data (E-Mail) (page 9-83)" in Scan Settings. Rotation Sending Setting When transmitting an image that is one of the following sizes, this function rotates the image 90 degrees counterclockwise. (The setting can be configured separately for each size.) 5-1/2"x8-1/2"R, A4, B5R, A5R, 8-1/2"x11", 16K Factory default settings: All Enabled 8-1/2" x 11"R and A4R size images are not rotated. 9-99