Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 966

SETTING MODE►SYSTEM SETTINGS Preheat Mode Setting The time until the preheating mode works is 1 to 60 minutes in 1-minute units (BP-50C26/BP-50C31/BP-50C36/BP-50C45/BP-70C31/BP-70C36/BP-70C45), Set in the range of 1 to 120 minutes (BP-50C55/BP-50C65/BP-70C55/BP-70C65). Preheat Mode will activate when the set duration of time elapses after printing ends and no further operations are performed. This function reduces your power costs, and at the same time helps conserve natural resources and reduce pollution. Select the time that best suits the needs of your workplace. The panel display can be turned Off in the Preheat mode. Factory default settings: 1 minutes Preheat mode cannot be disabled. Turn off Panel Display during pre-heat mode Set whether the lights on the operation panel turn off in preheat mode. Factory default settings: Enable As soon as the remote job is finished, enter Auto power shut off mode. This function works in Auto Power Shut-Off mode. When the machine completes a print job received from the PC or outputs received fax data, the machine immediately returns to the Auto Power Shut-Off mode. Factory default settings: Enable Fix transition time. The Auto Power-Off transition time is fixed. Select [Fix transition time.], and set the transition time in [Auto Power Shut-Off Timer]. When this setting is enabled, the [Change transition time by time of day.] option is disabled. Factory default settings: Enable, Auto Power Shut-Off Timer:11 minutes 9-192