Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 165

COPIER►BASIC PROCEDURE FOR MAKING COPIES COPY COLOR MODES Select the color mode from Auto, Full Color, B/W, 2 Color, and Single Color. Auto The machine automatically detects whether each original is color or black & white and switches the mode appropriately (full color for a color original or black & white for a black & white original). Full Color The original is copied in full color. B/W The original is copied in black and white. 2 Color The original is copied in two colors by changing a specific color used in the original to another color. If red is set to a specific color, reddish parts in an original are extracted, and changed to the specified color to make a copy. Single Color* The original is copied in any one color regardless of the colors used in the original. * Can be set in normal mode. If any color mode is selected, copying takes place in black and white when you tap the [B/W Start] key. 1 Original 8½x11 Tap the [Color Mode] key. Detail Color Mode Original Exposure N-Up Full Color Auto Off 2 Color Mode Auto Full Color B/W 2 Color Select the color mode. After the settings are completed, tap [OK] key. Check that the specified color mode is selected. • When auto mode is used, there may be some originals for which switching between color and black & white does not take place correctly. If so, tap the [Color Start] or [B/W Start] key to manually switch between color and black & white. • When [B/W Start] is selected, the [Color Start] key cannot be tapped. 3-17