Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 1037
I Don't Know How To Check An Address When
View all Sharp BP-70C45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1037 highlights
TROUBLESHOOTING►GENERAL PROBLEMS I WANT TO CHANGE THE FORMAT OR COMPRESSION OF A SCANNED IMAGE Check Use the [Format] key. Solution ■ You can use the [Format] key to set the format and compression percentage of a file to be saved or sent. In normal mode, you can create a file of a number of original pages [Specified Pages per File] can be used. I DON'T KNOW HOW TO CHECK AN ADDRESS WHEN SENDING AN IMAGE Check Tap the [Address Review] key. Solution ■ Tap the [Address Review] key to view a list of the addresses. AFTER THE ROUTER WAS REPLACED, I CAN'T USE SCAN TO NETWORK FOLDER OR SCAN Check Has the machine's IP address been changed? Solution ■ Check the IP address setting. If the machine does not have a permanent IP address (the machine receives an IP address from a DHCP server), scanning to network folder or scanning will not be possible if the IP address changes. You can check the machine's IP address in [Network Status] of setting mode. If the IP address has changed, change the port setting in the printer driver. "Settings" → [Status] → [Network Status] See: Software Setup Guide If the IP address changes frequently, it is recommended that a permanent IP address be assigned to the machine. "Settings (administrator)" → [System Settings] → [Network Settings] 10-54