Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 921

SETTING MODE►SYSTEM SETTINGS Printer Settings Prohibit Notice Page Printing Disables to print a notice page. Factory default settings: Enable Prohibit Test Page Printing Disables to print the test page. When this setting is enabled, [Status] → [Data List] → [List for User] → [Printer Test Page] in "Settings" cannot be used to print test pages. Factory default settings: Disable Exclude Bypass-Tray from Auto Paper Select When [Auto] is selected for paper type selection, the bypass tray is excluded from the trays that can be selected. This is recommended when special paper is often placed in the bypass tray. Factory default settings: Disable Disabling of USB Memory Direct Print Disables the function for directly printing of a file in a USB memory device. Factory default settings: Disable Disabling of Network Folder Direct Print Disables the direct printing from a network folder. Factory default settings: Disable Disabling sending while printing Disables the Image Send function during printing. Factory default settings: Disable Disable Blank Page Print Disables to print a blank page. Factory default settings: Disable Image Send Settings Disable Switching of Display Order Disables a change of display sequence (search number order, ascending, descending) in the address book and others. If set, the display is not sorted even when you tap the tab on the address book screen. The currently selected display order will be the order that is used after the setting is selected. Factory default settings: Disable Prohibit Fax Broadcasting Disables the facsimile broadcasting. Factory default settings: Disable Disable Scan Function PC Scan Specify this to disable remote PC scanning. Factory default settings: Disable Disable Storing to External Memory Device Set this when you want to prohibit data saving to an external memory such as a USB memory. Factory default settings: Disable Disable Registering Destination from Operation Panel Disables address control from the machine. Configure the setting for each of the following items: • Group (Direct Entry) • Group (Address Book) • Contacts Select All: Selects all items. Clear Checked: Clears all selections. Factory default settings: All Invalid Settings to Disable Registration 9-147