Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 838

SETTING MODE►SYSTEM SETTINGS Printer Settings Settings related to the printer function can be configured. Condition Settings Printer condition settings are described below. Prohibit Notice Page Printing Disables to print a notice page. Factory default settings: Enable Prohibit Test Page Printing Disables to print the test page. When this setting is enabled, [Status] → [Data List] → [List for User] → [Printer Test Page] in "Settings" cannot be used to print test pages. Factory default settings: Disable A4/Letter Size Auto Change When printing an 8-1/2" x 11" (letter) size image, this setting allows A4 size paper to be used if 8-1/2" x 11" size paper is not loaded. Factory default settings: Disable A3/Ledger Size Auto Change When printing 11" x 17" (ledger) size, if 11" x17" size paper is not loaded in the paper tray, it will be printed on A3 paper. Factory default settings: Disable Bypass Tray Settings Enable Detected Paper Size in Bypass Tray This is used to prohibit printing when the paper size specified for a print job is different from the paper size inserted in the bypass tray. Factory default settings: Disable Enable Selected Paper Type in Bypass Tray This is used to prohibit printing when the paper type specified for a print job is different from the paper type inserted in the bypass tray. Factory default settings: Enabled Exclude Bypass-Tray from Auto Paper Select When [Auto] is selected for paper type selection, the bypass tray is excluded from the trays that can be selected. This is recommended when special paper is often placed in the bypass tray. Factory default settings: Disable Job Spool Queuing When this function is enabled, received print jobs are displayed in the spool queue of the job status screen. The jobs are moved to the job queue after they have been analyzed by the machine. Multiple jobs that have not yet been analyzed appear in the spool queue. When this function is disabled, received print jobs are displayed in the job queue instead of being displayed in the spool queue. However, when an encrypted PDF job is printed, the job appears in the spool queue. Factory default settings: Enable 9-64