Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 233

COPIER►OTHER FUNCTIONS 1 Place the original. Place the original in the document feeder tray of the automatic document feeder, or on the document glass. AUTOMATIC DOCUMENT FEEDER (page 1-30) DOCUMENT GLASS (page 1-34) 2 Tap the [Others] key, and tap the [Erase] key. 3 Erase Left Up Right Down OK Clear Outer Frame Specify Frame+Center Reverse Erase Position of The Back Face Tap the checkbox of the edge that you wish to erase, and specify the erase position. Check that the tapped checkbox is set to . If the [Outer Frame] key is tapped, the [Up], [Down], [Left], and [Right] checkboxes are set to . If the [Specify Frame+Center] key is tapped, all the checkboxes are set to . Specify the erase edge on the reverse side when erasing edges of one to three sides of Up, Down, Left, and Right on the front side to scan a 2-sided original. • If the [Reverse erase position of back face] checkbox is set to edge on the front side will be erased. , the edge in the position opposite to the erased • If the [Reverse erase position of back face] checkbox is set to will be erased. , the edge in the same position as on the front side 4 Specify the erase width. Tap the numeric value display indicating the erase width area on the front side or reverse side, and enter the area using the numeric keys. After the settings are completed, tap [OK] and [Back] keys in sequence. To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with . • To cancel the erase setting: Tap the [Clear] key. • To cancel all settings: Tap the [CA] key. 5 Tap the [Color Start] or [B/W Start] key to start copying. 3-85