Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 943
Wireless Settings
![]() |
View all Sharp BP-70C45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 943 highlights
SETTING MODE►SYSTEM SETTINGS Wireless Settings Used to enable or disable the wireless LAN and show the status of wireless LAN. When using BP-50C26/BP-50C31/BP-50C36/BP-50C45/BP-50C55/BP-50C65, it is displayed when the wireless connection adapter is installed. Connection Type Switch between [Wired Only], [Wired + wireless (access point)], [Wireless (Infrastructure Mode)] or [Wired+Wireless (Wi-Fi Direct Mode)] according to the network connection status. Factory default settings: Wired + wireless (access point) Keep Wireless Access Point activated This can be set only when "Connection Type" is "Wired+Wireless (Access Point Mode)". If enabled, the machine can normally use a wireless LAN network. If disabled, wireless LAN will be enabled when the NFC touchpoint area is touched on a mobile device or when the [Easy Connect Setup (QR code)] key is tapped on the home screen. When one of the conditions below occurs, the wireless LAN connection is automatically canceled. • When there is no connection to the access point for a certain period of time. Factory default settings: Disable Current Setting Shows settings, such as the SSID of a wireless LAN and security type. If the wireless LAN is disabled, "--" appears. Current Wireless Status This shows reception levels (Max. 100) of the wireless LAN and IP addresses. Show Wireless Setting Screen Click the [Setup] button. In the Wireless Setting screen, you can configure the SSID of a wireless LAN, Security Type, Encry., and Security Key. Initialize Wireless Settings Click the [Initialize] button. The settings for SSID, Security Type, Encry., and Security Key are initialized. Wireless Setting screen (Access Point Mode) If the [Settings] button is clicked while [Connection Type Switching] is set to [Wired+Wireless (Access Point Mode)] or [Wired Only], the Wireless Settings (Access Point Mode) screen is displayed. Configure the SSID of a wireless LAN, Security Type, Encry., and Security Key. Clicking the [Submit] button stores the settings. Frequency Band Set the frequency band used for a wireless LAN. Factory default settings:No Sound SSID Enter the SSID. 9-169
![](/manual_guide/products/sharp-bp50c26-color-advanced-essentials-bp-series-operating-manual-9e53f11/943.png)