Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 849

SETTING MODE►SYSTEM SETTINGS Apply Addresses of Sending Modes Only When an address is selected from the address book, only the addresses displayed in narrowing mode are applied. Factory default settings: Enable Category Displayed as Default Select a category to be displayed with the default. • None • Frequent Use • Categories 1 to 32 Factory default settings: None Display all address type regardless of the mode being displayed currently. Displays all destinations regardless of the displayed mode when this setting is enabled. Factory default settings: Disable Enlarging the Address Book An enlarged address book list appears. Factory default settings: Enable Image Orientation Sets the default image orientation. Factory default settings: Portrait Preview Setting Received Data Image Check Setting Select whether or not a preview of received faxes and Internet faxes is shown. This is displayed when a facsimile expansion kit or Internet fax expansion kit is installed. Factory default settings: Disable Default List/Thumbnail Display Fax/I-Fax Reception Data: Fax/I-Fax Reception Data: Select whether the default display format of the received fax/I-Fax list screen is list or thumbnails. Factory default settings: Thumbnail Default Exposure Settings This is used to set the default exposure settings for scanning a document in image send mode. Select [Auto] or [Manual]. If you select [Manual], set the exposure to one of 5 levels. Factory default settings: Auto When the exposure is set to [Auto], a default original type cannot be selected. Default Original Image Type Select the original type beforehand to enable scanning at a resolution suitable for the original (only in scan mode and USB memory device scan mode). The following settings can be configured. • Text/Printed Photo • Text/Photo • Text • Photo • Printed Photo • Map Factory default settings: Text 9-75