Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 35

BEFORE USING THE MACHINE►HOW TO PLACE THE ORIGINAL 1 Make sure that there is no original on the document glass. 2 Below the indicator line Align the edges evenly and face them up Insert to the end Fit to the Original Size Place the original. BP-50C26/BP-50C31/BP-50C36/BP-50C45/BP-50C55/ BP-50C65: Up to 100 sheets can be inserted. BP-70C31/BP-70C36/BP-70C45/BP-70C55/ BP-70C65: Up to 300 sheets can be inserted. After scanning is finished on the automatic document feeder, remove originals from the original exit tray. PREVENTIVE LIGHT TO INDICATE ORIGINAL LEFT BEHIND In order to prevent originals being left behind, the automatic document feeder (BP-70C31/BP-70C36/BP-70C45/BP-70C55/BP-70C65) incorporates a lamp on the top of the original exit tray. This lamp detects a document on the automatic document feeder, and starts blinking after the last original is output from the original exit tray. Light turning off The preventive light to indicate original left behind will turn off in the event of the following. • When the scanned original is removed • After the preventive light to indicate original left behind blinks three times, repeated three times • When a new original is placed in the automatic document feeder, and a job started • When the machine enters sleep mode • When use of the automatic document feeder is prohibited • When the preventive light to indicate original left behind is blinking, placing the original on the document glass will not turn off the preventive light to indicate original left behind. • The preventive light to indicate original left behind will not turn off by only placing an original on the automatic document feeder. • The preventive light to indicate original left behind will not turn off even if the operation panel is off. • If the preventive light to indicate original left behind turns off, this will not flash even if an original is left on the automatic document feeder. 1-32