Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 286

COPIER►CONVENIENT COPY FUNCTIONS When a job program is not stored Set reduction from 11" x 17" (A3) to 8-1/2" x 11" (A4) When a job program is stored Retrieve the stored program. Change the exposure setting. Tap the [Color Start] or [B/W Start] key. Set 2-sided copying. Set margins. Set punch hole settings. Tap the [Color Start] or [B/W Start] key. Considerable time is required to copy the drawings each month because the above settings must be selected. In addition, mistakes are occasionally made when selecting the settings, so some copies must be redone. The settings are stored in a program, so they can be selected by the touch of a key. This is simple and takes no time. In addition, the settings are all stored so there are no chances for mistakes, and thus no need to redo copies due to setting mistakes. • Up to 48 programs can be stored. • Program settings remains registered even when the main power has been turned off. • A program can also be stored in the home screen or favorite as a shortcut; therefore, it is helpful when retrieving it. 1 Specify the copy function to be stored. In the base screen, display [Program Registration] on the action panel. 2 Tap [Program Registration] on the action panel. 3 Program Registration Select Program No. to Register. OK 01 01 Pre-Setting Program 02 02 03 03 05 05 04 04 06 06 07 07 08 08 09 09 10 10 Tap an unused key. A key with a program stored is displayed in color. Tap a key with no program stored. If you do not set a name for the program, a serial number will be automatically assigned as the name. 3-138