Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 835

SETTING MODE►SYSTEM SETTINGS Quick Scan from Document Glass (B/W) The resolution for copying in black and white using the document glass can be changed from 600 x 600 dpi to 600 x 400 dpi (high speed mode). When high speed mode is selected, the first copy time is quicker, however, the copy image is not as clear. Factory default settings: Disable When high quality mode is not selected, the following conditions must be satisfied in order to scan at 600 x 400 dpi and attain the fastest speed. • The copy ratio must be set to 100%. • Do not select a special mode that will change the ratio. • [Copy of Copy] must not be enabled. • Do not copy in black and white with the [Color Start] key. Auto Clear Before Copy Execution Also Enables the Auto Clear function during copy even when a copy job is not completed. This protects the machine from being held due to the incomplete copy job. Factory default settings: Disable Display Warning Message when Original is not Detected A message is displayed when the original size cannot be detected when the original is set. You can prevent output with an unintended original size. Factory default settings: Disable Initial Status Settings The following settings are related to copying. Default settings selected with these settings apply to all functions of the machine (not just the copy function). The copier settings are reset to the initial state when the [Power] button is turned on, when the [CA] key is tapped, or when the auto clear interval has elapsed. These settings are used to change the default settings for copy mode. This setting requires administrator privileges. The following settings can be changed: Item Description Color Mode Image Orientation Paper Tray Exposure Type Copy Ratio Select magnification automatically according to paper size, when paper tray is selected. Configure default color mode settings. Factory default settings: Full Color Specify the original orientation. Factory default settings: Portrait Specify the paper tray that is selected by default. Factory default settings: Varies depending on the machine configuration Configure default exposure mode settings. Factory default settings: Auto Specify the copy ratio that is selected by default. Factory default settings: 100% The copy magnification is automatically changed according to the paper size in the selected paper tray. Factory default settings: Disable 9-61