Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 935
mDNS Settings, SNMP v1 Settings
![]() |
View all Sharp BP-70C45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 935 highlights
SETTING MODE►SYSTEM SETTINGS Timeout Enter a timeout. Factory default settings: 5 seconds Synchronous Interval Enter an interval to synchronize to the SNTP server. Factory default settings: 6 Hour Synchronize Upon Start To establish synchronization during machine startup, set to . Factory default settings: Disable Synchronize Now When tapped, the machine is synchronized with the SNTP server time. mDNS mDNS Settings mDNS Set this option to use the mDNS settings. Factory default settings: Enable Service Name Enter a service name. Domain Name Display the domain name. Priority Service Select a service you use with the priority. Factory default settings: LPD SNMP SNMP v1 Settings SNMP v1 Settings Set this option to use the SNMPv1 settings. Factory default settings: Enable Access Method Set an access method. Factory default settings: Read-write Access GET Community Enter the GET community name to fetch the device information using SNMP. Factory default settings: public SET Community Enter the SET community name required for SNMP setting. Factory default settings: private Change SET Community To change the SET community, set . Factory default settings: Disable TRAP Community Enter the community name to be used for the SNMP TRAP sent from the device. Factory default settings: public TRAP Target Address Enter the IP address of the destination computer for SNMP TRAP communication. 9-161
![](/manual_guide/products/sharp-bp50c26-color-advanced-essentials-bp-series-operating-manual-9e53f11/935.png)