Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 888

SETTING MODE►SYSTEM SETTINGS Disabling Text/Stamp printing at Reprint When a stored file is retrieved and printed, the printing functions are disabled. This function prevents an inconsistency of the date between the original data and output data and others. Factory default settings: Disable Batch Print Settings Set whether or not the [All Users] key and the [User Unknown] key are prohibited in the user name selection screen when printing all files. Factory default settings: Selection of [All Users] is not allowed.:Enable, Selection of [User Unknown] is not allowed.:Enable Print Order Setting for the Batch Print/Multi-File Print Sets whether the files are ordered by date (newer/older) or by file name (ascending/descending). Factory default settings: Date (Dsc.) Erase Width Adjustment This is used to set the default erase width for erase function. Specify a value from 0" (0 mm) to 1" (25 mm) in increments of 1/8" (3 mm) for both edge erase and center erase. Factory default settings: Edge Clearance Width:10mm (1/2"), Center Clearance Width:10mm (1/2") Card Shot Settings This is used to set the default original size for the card shot function. Specify a value from 1" (25 mm) to 8-1/2" (216 mm) in increments of 1/8" (3 mm) for both the X (horizontal) and Y (vertical) dimensions of the original. Factory default settings: Original Size:X: 86 mm (3-3/8"), Y: 54 mm (2-1/8") Fit to Store Size Always displays the [Fit to Store Size] key on the card shot screen. Factory default settings: Disable Setting of store/delete after file print Select whether or not to save or delete a file after printing. Factory default settings: Store Default Setting of PDF Format for PC Browsing You can set the initial file format of public PDF or the file for download which is created during execution of each job. B/W, Color/Grayscale Set the compression format for B/W,and the compression rate for Color/Grayscale. For B/W,, select from uncompressed, MH (G3), MMR (G4). For Color/Grayscale, select the file compression ratio from Low, Medium, and High. Settings during each job execution When each of copy, printer, scanner, Internet fax, fax, or stored scan data is executed, you can specify to create a public PDF and to set the resolution of public PDF. Factory default settings:B/W:Compression Mode:MMR(G4) Color/Grayscale:Compression Ratio:Middle Copy:Disable, Apply the resolution at job execution:Disable, Resolution:200dpi×200dpi Printer:Disable, Apply the resolution at job execution:Disable, Resolution:200dpi×200dpi Scanner:Disable, Apply the resolution at job execution:Disable, Resolution:200dpi×200dpi Internet fax:Disable, Apply the resolution at job execution:Disable, Resolution:200dpi×200dpi FAX:Disable, Apply the resolution at job execution:Disable, Standard Scan to Local Drive:Disable, Apply the resolution at job execution:Disable, Resolution:200dpi×200dpi 9-114