Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 949

SETTING MODE►SYSTEM SETTINGS Condition Settings Restrict Print Jobs other than the current Print Hold Job You can select settings to cancel print jobs that are not print hold jobs, or force all print jobs to be held. When [Restrict Print Jobs other than the current Print Hold Job] is turned ON, the settings below can be selected. Item Description Force Retention This setting forcibly sets all print jobs as print hold jobs, even jobs for which print hold is not selected. Disable Job Prohibit all print jobs other than print hold jobs. Factory default settings: Force Retention Automatic Deletion of Suspended Print Jobs If the job is interrupted due to a paper jam, etc., the job is automatically deleted after the time set in "Time until automatic deletion" has elapsed. Factory default settings: Disable Time until Suspended Print Jobs are Automatically Deleted Set the time after stopping a job to automatically deleting the job. Factory default settings: 5 minutes Reject Requests from External Sites You can reject the request from external sites. Factory default settings: Enabled If Firmware Corruption is Detected, Restore It When the machine starts up, the firmware is inspected, and if any damage is found, it automatically recovers to the state before the damage. Factory default settings: Disable Apply Security Policy The default administrator is displayed at login. Set whether to apply the security policy on this machine. Factory default settings: Disable Mandatory Access Control Set whether to perform forced access control. Once set, access to all files inside the machine will be forcibly controlled. Factory default settings: Disable Job Status Jobs Completed List Display Setting Set to show/hide the completion screen of the job status screen. Factory default settings: All disable Job Status Display Setting Sets the contents to be displayed in the job status. For printing, you can choose to show or hide the file name. For image send, the destination can be shown or hidden. Factory default settings: All disable 9-175