Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 987

TROUBLESHOOTING►GENERAL PROBLEMS ? Problem SMUDGES APPEAR ON PRINTED OUTPUT WHEN PRINTING ON THICK PAPER, THE PRINT RESULT IS DIRTY FROM THE 2ND PAGE ON I DON'T KNOW HOW TO CHANGE THE OUTPUT TRAY PART OF THE IMAGE IS CUT OFF PRINTING TAKES PLACE ON THE WRONG SIDE OF THE PAPER A COVER OR INSERT IS NOT PRINTED ON THE SPECIFIED PAPER THE CONNECTED USB DEVICE CANNOT BE USED THE FINISHER/SADDLE FINISHER DOES NOT OPERATE STAPLING DOES NOT TAKE PLACE (INCLUDING SADDLE STITCH) PUNCHING DOES NOT TAKE PLACE THE STAPLING POSITION OR PUNCH POSITION IS NOT CORRECT FOLDING DOES NOT TAKE PLACE THE FOLD POSITION IS NOT CORRECT PREVIEW IMAGES OR THUMBNAIL IMAGES DO NOT APPEAR THE TOUCH PANEL DISPLAY IS DIFFICULT TO VIEW YOU WERE LOGGED OUT WITHOUT LOGGING OUT YOURSELF Check Are you using paper that is not within the specifications? Are you printing on pre-punched paper? Does a message appear indicating the need for maintenance? Remove the paper, turn it over, and reload it. Using a different paper type may solve the problem. Has the paper type been set correctly? Did you change the output tray? Has the correct paper size been set? Was the original placed in the correct position? Is the paper loaded with the print side facing in the correct direction? Has the paper type been set correctly? Is the USB device compatible with the machine? Is the connected USB device recognized correctly? Is the USB memory formatted as FAT32 or NTFS? Are you using a USB memory device with a capacity of more than 32 GB? Does a message appear indicating that you need to remove paper from the stapler compiler? Have functions been disabled by the administrator? Does a message appear instructing you to check the staple unit? Does a message appear instructing you to add staples? Is a different width of paper mixed in? Are there more sheets than can be stapled at once? Is a paper size that cannot be stapled included in the print job? Is the paper type setting of the tray selected in the printer driver set to a paper type that cannot be stapled? Does a message appear instructing you to check the punch module? Is a different size of paper mixed in? Is a paper size that cannot be punched included in the print job? Is the tray selected in the printer driver set to a paper type that cannot be punched? Is the stapling position setting correctly? Are the punching positions setting correctly? Is it a paper size that can be folded? Did the administrator enable the [Disabling of Duplex] setting? Are you using a paper type that has a specific front and reverse side? Is the original placed face up or face down correctly? Are there a number of jobs waiting to be executed? Is the brightness properly adjusted? Did Auto Clear activate? Page 10-13 10-13 10-13 10-13 10-14 10-14 10-14 10-14 10-15 10-15 10-15 10-15 10-15 10-15 10-16 10-16 10-16 10-16 10-16 10-16 10-16 10-16 10-17 10-17 10-17 10-17 10-17 10-17 10-18 10-18 10-18 10-18 10-18 10-18 10-19 10-4