Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 879

SETTING MODE►SYSTEM SETTINGS Fax Data Receive/Forward (Manual) Fax Settings These settings can be configured when the facsimile expansion kit is installed. Item Description Receive Settings Multiple Set Print Staple Fold Forward Received Data Set the fax reception method. Auto Reception: When a call comes in, the machine rings and then automatically begins fax reception. Manual Reception: Used when an existing external telephone is connected to the machine. You can answer to a phone call first, and then receive a fax by manual operation. Factory default settings: Auto Reception Specify whether or not two or more copies of received faxes will be printed. The number of copies can be set with the "Number of Prints (page 9-93)" Factory default settings: Disable Specify whether or not stapling is performed. Set the binding method with "Staple Settings (page 9-93)". Factory default settings: Disable Specify whether or not folding is performed. Factory default settings: Disable When the machine cannot print because it is out of paper or out of toner, received faxes can be forwarded to another previously stored fax machine. • If there is no forwarding data or if the destination is not registered, no data is forwarded. • If "Hold Setting for Received Data Print (page 9-76)" is enabled, you will be prompted for a password. Enter the correct password using numeric keys. • If some pages of a fax that is being forwarded were successfully printed, only those pages that were not printed will be forwarded. • A forwarded fax becomes a fax transmission job. If transmission does not take place because the transmission was canceled or an error occurred, the fax will be held in memory until it can be printed. • All faxes received are forwarded. Note that the received data stored in the F-code confidential memory box is not forwarded. • For destination number registration, see "Set the Telephone Number for Data Forwarding (page 9-93)" . 9-105