Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 19

BEFORE USING THE MACHINE►LOADING PAPER 4 Insert the paper into the tray. • Load the paper with the print side facing up. The stack must not be higher than the indicator line (maximum of 550 sheets). • Fan the paper well before loading it. If the paper is fed while overlapping, it may cause a paper jam. • After loading the paper, close the guides to the paper width not to leave the gap from the guides A and B. Do not load the paper as shown below. 5 Close the tray slowly. Push the tray into the machine slowly. Forcefully inserting the paper may cause skewed feeding and paper misfeeds. LOADING PAPER IN THE SRA3 When loading paper in the SRA3, follow the steps below to move the control plate auxiliary block. 1 Remove the control plate auxiliary block. 2 Attach the control plate auxiliary block that was removed in step 1. 1-16