Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 832

SETTING MODE►SYSTEM SETTINGS Copy Settings Condition Settings The following settings are related to copying. Default settings selected with these settings apply to all functions of the machine (not just the copy function). This setting requires administrator privileges. Rotation Copy Setting When the original and paper are placed in different orientations, this function automatically rotates the image 90 degrees to enable correct copying on the paper. Factory default settings: Rotation Copy When copying 5-1/2" x 8-1/2" (or A5 / A6) size documents to 5-1/2" x 8-1/2" R (or A5R / A6R) size paper, set the rotation copy. Disable Copy in Different Size Copying is prohibited when the orientation of the copy paper and the original are different, or when the optimum size copy paper is not loaded. Factory default settings: Disable It is valid when "Rotation Copy Setting (page 9-58)" is canceled. Add or Change Extra Preset Ratios Add two enlargement preset ratio values (101% to 400%) and two reduction preset ratio values (25% to 99%). Also, you can change the preset ratio if necessary. Preset ratios other than added preset ratios cannot be changed. Setting a Maximum Number of Copies This is used to set the maximum number that can be entered for the number of copies (number of continuous copies). Any number from 1 to 9999 can be specified. Factory default settings: 9999 Stamp Set the font size of the print menu. Factory default settings: Middle Initial Margin Shift Setting This is used to set the default margin shift amount. Specify a value from 0" (0 mm) to 2" (50 mm) in increments of 1/8" (3 mm) for both the front and reverse sides. Factory default settings: Side 1:1/2" (10mm), Side 2:1/2" (10mm) 9-58