Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 45
Finisher
View all Sharp BP-70C45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
BEFORE USING THE MACHINE►PERIPHERAL DEVICES FINISHER This device outputs sorted paper while staggering each set of paper. As needed, it staples each set. To punch holes in printed paper, install an optional hole punch module. PART NAMES (1) (2) (3) (4) (1) Output tray (upper tray) The tray is slidable. To print on large paper such as 11" x 17" (A3) paper, extend the tray. (2) Output tray (lower tray) Stapled and offset output is delivered to this tray. The tray is slidable. To print on large paper such as 11" x 17" (A3) paper, extend the tray. (3) Top cover Open this cover to remove a paper misfeed. (4) Front cover Open this cover to replace the staple cartridge remove a staple jam or remove a paper misfeed. • To install a finisher, a paper pass unit or folding unit and stand/550/2x550/3x550/550&2100 sheet paper drawer are required. • A finisher cannot be installed simultaneously with an inner finisher, finisher (large stacker), saddle stitch finisher or saddle stitch finisher (large stacker). • Do not place heavy objects on the finisher or press down on the finisher. • Exercise caution when you turn on the power and when printing take place, as the tray may move up and down. 1-42