Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 913

SETTING MODE►SYSTEM SETTINGS Operation by User Who Has Password • Operational Authority: This is used to allow a user who has a password to operate the machine remotely. For information on the password, consult your service technician. • View Password Entry Screen: When operating the machine by remote control using the remote software, the password entry screen will appear on both the computer and the machine, or on only the computer. Factory default settings: Operational Authority: Prohibited, View Password Entry Screen:Display in Both PC and MFP Data List Set whether to print the data list with 1-sided print or 2-sided print. Factory default settings: 1-sided print Tandem Connection Setting When two machines are used as network printers using TCP/IP protocol, use this setting to configure the port number and IP address of the machine used as the tandem client machine. Factory default settings: Port Number:50001 Disabling of Master Machine Mode To prohibit tandem transmission, enable this setting. (Normally this setting is not necessary.) Factory default settings: Disable Disabling of Client Machine Mode To prohibit tandem reception, enable this setting. (Normally this setting is not necessary.) Factory default settings: Disable To use the tandem function when user authentication is enabled, the same login name and password must be used on both the master machine and slave machine. If the same login name and password are not used, the page count may not be added to the appropriate user count or only the master machine may print. Use the same port number as long as it does not cause any inconvenience. Easy Mode Settings Set the items that can be selected in Easy Copy and other Easy modes. The items appear will appear in order on the screen starting from the item that is set in No. 1. Items that can be set in Easy Copy Paper Select, 2-Sided Copy, Copy Ratio Staple / Punch, Color Mode, Original, Exposure, N-Up, Card Shot Job Build, Blank Page Skip, Dual Page Copy Factory default settings: No.1:Paper Select, No.2:2-Sided Copy, No.3:Copy Ratio, No.4:Staple / Punch, Staple (For models without punch function) No.5:Color Mode, No.6:Image Orientation, No.7:Exposure, No.8:Card Shot Items that can be set in Easy Scan Address Book, History, Global Address Search, Local Drive/USB, Original, Resolution, File Format, Blank Page Skip and Card Shot., Job Build, Dual Page Scan, File Name, Mobile Address Book Factory default settings: No.1:Address Book, No.2:History, No.3:Global Address Search, No.4:Local Drive/USB, No.5:Original, No.6:Resolution No.7:File Format, No.8:Blank Page Skip Items that can be set in Easy Fax Address Book, History, Direct Entry, Original, Exposure and Resolution., Sending Line, Job Build, Mobile Address Book Factory default settings: No.1:Address Book, No.2:History, No.3:Direct Entry, No.4:None, No.5:Original, No.6:Exposure, No.7:Resolution, No.8:Sending Line The items that can be set vary depending on the peripheral devices that are installed. 9-139