Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 977

SETTING MODE►SYSTEM SETTINGS Password Enter the password. To change the password, set [Change Password] to . POP before SMTP If is set, you are authenticated to the POP server before using the SMTP communication. • POP3 Server: Enter the IP address or the host name of the secondary SMTP server. • Port Number: Enter the POP3 port number for POP before SMTP communication. The default setting is port 110. • POP Authentication: If is set, the authentication protocol (including APOP) is used for authentication to the POP3 server. • User Name: Enter the user name for POP before SMTP communication. • Password: Enter the password required for POP before SMTP communication. To change the password, set [Change Password] to . • Enable SSL/TLS:If set to , the POP over SSL/TLS communication or the POP over TLS communication by STLS command is enabled. This requires the server to support the POP over SSL/TLS communication or the STLS command. To allow SSL/TLS communication, set the "Port Number" to the POP over SSL communication port number. To allow POP over TLS communication, set the "Port Number" to the same port number as for the normal POP3 communication. Connection Test Tap the [Execute] button to test the connection to the SMTP server. 9-203