Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 827

SETTING MODE►User Control Billing Code Setting Select billing codes. Administration Settings Change the billing code setting. Use Billing Code Switch whether to enable or disable a billing code. Factory default settings: Disabled Use Code Settings A use code is automatically assigned when no billing code is entered. Specify the code using up to 32 single-byte characters. Take Over Billing Code at Mode Transition If this function is enabled, the billing code entry window is not displayed at the time of mode transition. Disable Change of Billing Code. If this function is enabled, you cannot register, edit, or delete a billing code. In addition, you cannot directly type in a billing code in the billing code entry window. Apply Use Code While Logged in with Device Account If this function is enabled, a use code is always set while you are logging in with device account. Exception Setting for Billing Code Function The billing code entry window is displayed when the external application that is set to enable is started. The following settings can be configured. • Application Name registered as Standard Application Billing Code Display Name Setting You can change the main code or sub code name displayed in the billing code entry window or billing code selection window. Main Code List You can display a list of main codes to search for, register, correct, or delete a main code. • [Search] key Searches for a main code. • [Add] key Adds a new main code. • List display Displays a list of registered main codes. Selecting each main code displays the window to correct the main code. • [Delete] key Set the check box on the left of each main code to , then tap the [Delete] key; the selected main code is deleted. 9-53