Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 225

COPIER►OTHER FUNCTIONS CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS (ORIGINAL COUNT) This function counts the number of scanned original sheets, and displays the result before making a copy. By allowing you to check the number of original sheets that were scanned, this helps reduce the occurrence of copy mistakes. • Original count cannot be selected in easy mode. • The count result is displayed with the number of scanned original sheets, not the number of scanned original pages. For example, when 2-sided copying is performed using one original, the number "1" will appear to indicate that one original sheet was scanned, not "2" to indicate the front-side page and the reverse side page. • Original Count must be specified before scanning the original. 1 Tap the [Others] key, and tap the [Original Count] key. A checkmark appears on the icon. After the settings are completed, tap the [Back] key. To cancel the Original Count setting: Tap the [Original Count] key to uncheck it. 2 Place the original in the document feeder tray of the automatic document feeder. AUTOMATIC DOCUMENT FEEDER (page 1-30) 3 Tap the [Color Start] or [B/W Start] key. 4 1 pages of original have been scanned. Copy the scanned data? Cancel OK Check the number of original sheets. The number that is displayed is the number of scanned original sheets, not the number of scanned original pages. For example, when 2-sided copying is performed using one original, the number "1" will appear to indicate that one original sheet was scanned, not "2" to indicate the front-side page and the reverse side page. If the displayed number of original sheets is different from the actual number of sheets Tap the [Cancel] key to stop the job. 5 Tap the [OK] key to start copying. If this function is combined with [Job Build], the count result is displayed after the [Read-End] key has been tapped. 3-77