Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 907

SETTING MODE►SYSTEM SETTINGS Tray Registration Select Paper Sizes for Auto Detection "Select Paper Sizes for Auto Detection" in the bypass tray settings screen is used to select the paper size that is automatically detected from similar sizes when the automatic paper size detection takes place. When paper that is the same size as one of the paper sizes in the settings is placed in the bypass tray, the size that is selected in the settings will be automatically detected. List name Description Auto-AB A4R, A5, 216mm x 330mm (8-1/2" x 13"), 216mm x 340mm (8-1/2" x 13-2/5"), 216mm x 343mm (8-1/2" x 13-1/2") Auto-Inch 8-1/2" x 14", 8-1/2" x 13-2/5" (216 mm x 340 mm), 8-1/2" x 13-1/2" (216 mm x 343 mm) Custom Size Registration (Bypass) If you frequently use a non-standard size paper in the bypass tray, register that paper size in advance. Registering the paper size saves you the trouble of setting the size each time you need to use it. Up to Seven paper sizes can be registered. Tap the key ([Custom 1] to [Custom 7]) in which you wish to register or change a paper size, and the registration screen appears. Select whether you wish to enter the size in mm ("Size Input-AB") or inches ("Size Input-Inch"), and then set the X and Y dimensions of the paper. "Size Input-AB" The X direction can be set between 140mm and 457mm. The Y direction can be set between 90mm and 320mm. Factory default settings: X:420 mm, Y:297 mm "Size Input-Inch" The X direction can be set between 5-1/2" and 18". The Y direction can be set between 3-5/8" and 12-1/2". Factory default settings: X: 17" Y: 11" 9-133