Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 253

COPIER►OTHER FUNCTIONS INSERTING COVERS IN COPIES (COVERS/INSERTS) This function inserts a different type of paper into the pages corresponding to the front and back covers of a copy job. It is helpful when you want to change cover paper to make resources look better. Configure insertion sheet settings if needed. • To insert insertion sheets, see "INSERTING INSERTION SHEETS IN COPIES (COVERS/INSERTS) (page 3-113)". • For N-Up, the layout is based on the first page and excludes covers. Copying on a front cover and inserting together with a back cover A different type of paper is inserted as a front cover, and a back cover is inserted to the last of the copy job. 1 2 3 4 5 1 2 3 4 5 Front Cover Back Cover Front cover paper Back cover paper Copy Cover inserting examples The following shows the copy results when front and back covers are inserted into six 1-sided original pages or three 2-sided original pages in the four copy modes below. 1-sided copying of 1-sided originals Setting conditions for each cover Front Cover Back Cover Resulting copies Not copied Not copied 1 2 3 4 5 6 Inserts cover sheets at the beginning and end of copies. 1-sided copy Not copied 1 2 3 4 5 6 Makes a 1-sided copy on the first original page for front cover, and inserts a back cover at the end of copies. 2-sided copy Not copied 1 3 4 5 6 2 Makes a 2-sided copy on the first and second original pages for front cover, and inserts a back cover at the end of copies. 3-105