Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 6

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE (13) (14) (15) (16) (17) (18) (27) (28) (19) (20) (21) (22) (23) (24) (25) (26) (13) Saddle Stitch Finisher (large stacker)*1 (21) Finisher (large stacker)*1 This staples and folds paper. A punch module can also be installed to punch holes in output paper. You can also perform stapling manually. ► SADDLE STITCH FINISHER (LARGE STACKER) (page 1-53) (14) Paper pass unit*1 Relay between the machine and the finisher, finisher (large stacker), saddle stitch finisher or saddle stitch finisher (large stacker). (15) Motion sensor*2 This sensor detects the presence of a person that approaches the machine, and automatically wakes the machine from sleep mode. (Motion Sensor Mode Only) (16) Utility table*2 This staples paper. A punch module can also be installed to punch holes in output paper. You can also perform stapling manually. ► FINISHER (LARGE STACKER) (page 1-45) (22) Punch module*1 This is used to punch holes in output. Requires an inner finisher, finisher, finisher (large stacker), saddle stitch finisher or saddle stitch finisher (large stacker). (23) Tray 1 Store paper in this tray. ► TRAY 1 - 4 (when a stand/550/2x550/3x550/ 550&2100 sheet paper drawer is installed) (page 1-15) (24) Tray 3 (when a stand/2x550/3x550 sheet paper drawer is installed)*1 You can use this as a work platform, or temporarily place originals or a mobile device. Store paper in this tray. ► TRAY 1 - 4 (when a stand/550/2x550/3x550/ 550&2100 sheet paper drawer is installed) (page • Do not place anything that weighs more than 5kg or 1-15) otherwise apply a load. • Do not place a container that contains water or other liquid. Risk of fire and electrical shock if the liquid spills and enters the machine. • Working on the table while the machine is in operation may cause poor image quality or other problems. (17) Bypass tray Use this tray to feed paper manually. When loading paper larger than 8-1/2" x 11"R or A4R, (25) Tray 4 (when a stand/3x550 sheet paper drawer is installed)*1 Store paper in this tray. ► TRAY 1 - 4 (when a stand/550/2x550/3x550/ 550&2100 sheet paper drawer is installed) (page 1-15) (26) Tray 2 (when a low stand/550 sheet paper drawer or stand/ 550/2x550/3x550/550&2100 sheet paper drawer is installed)*1 pull out the extension guide. Store paper in this tray. ► LOADING PAPER INTO THE BYPASS TRAY (page ► TRAY 1 - 4 (when a stand/550/2x550/3x550/ 1-22) 550&2100 sheet paper drawer is installed) (page (18) Tray 5 (when a large capacity tray is installed)*1 1-15) Store paper in this tray. (27) Tray 4 (when a stand/550&2100 sheet paper drawer is installed)*1 ► LOADING PAPER IN THE LARGE-CAPACITY TRAY (when a large capacity tray is installed) (page 1-20) Store paper in this tray. ► TRAY 3 - 4 (when a stand/550&2100 sheet paper (19) Finisher*1 drawer is installed) (page 1-18) This staples paper. A punch module can also be installed (28) Tray 3 (when a stand/550&2100 sheet paper drawer is installed)*1 to punch holes in output paper. ► FINISHER (page 1-42) Store paper in this tray. ► TRAY 3 - 4 (when a stand/550&2100 sheet paper (20) Saddle stitch finisher*1 drawer is installed) (page 1-18) This staples and folds paper. A punch module can also be installed to punch holes in output paper. ► SADDLE STITCH FINISHER (page 1-49) *1 Peripheral device. *2 This device can only be equipped on the BP-70C31/BP-70C36/BP-70C45/BP-70C55/BP-70C65. 1-3