Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 978

SETTING MODE►SYSTEM SETTINGS Image Quality Adjustment Registration Adjustment and Fusing Cleaning Mode in [Collective Adjustment], all Common Functions, and removal of a toner cartridge can only be executed in setting mode on the machine. Color Profile Settings can only be configured on the Web page. Collective Adjustment Various devices mounted on the machine can be set. Registration Adjustment If the printed colors shift out of position when you print by Color printing, you can adjust the print position of each color to reduce color shifting. Tap the [Execute] key. Fusing Cleaning Mode Use this function to clean the machine's fusing unit when dots or other dirt appear on the printed side of the paper. When this function is executed, "V" printed paper is output and the fusing unit is cleaned. If improvement is not noticed after the first time you use the function, try executing the function again. Black Letter/Black Line Width Adjustment Adjust black text and the width of black lines. After using this function to perform adjustment, perform [System Settings] - [Common Functions] - [Auto Color Calibration (for Copy)], [Auto Color Calibration (for Print)]. Factory default settings:0 Dark Streak Reduction Specify to use the dark streak reduction or not. The dark streak reduction can be used for Scan Original, Copy, Image Send, and Scan to local drive functions. If the dark streak reduction is enabled, select any of the following options. Treat Thin Dark Streaks: Use this setting to make thin dark streaks less apparent. (Low level) Normal: Use this setting to make dark streaks less apparent. (Medium level) Treat Up to Thick Dark Streaks: Use this setting to make thick dark streaks less apparent. (High level) Factory default settings: Disable Increasing the level of dark streak treatment may result in faint text and poor reproduction of lines. Display warning message for dark streaks detection. Set this option to display a warning message when dark streaks are detected by the document feeder. Factory default settings: Disable 9-204