Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 475

FACSIMILE►OTHERS FUNCTIONS • The settings stored in a program will be retained even after the program is used for transmission. The same settings can be used repeatedly for transmission. • The following contents cannot be stored in programs: • Tapping the [Speaker] key, Quick File, File, page move and unspecified erase during preview, Metadata Entry, Send Settings, and Own Name Select. • Up to 48 programs can be stored. • Up to 500 destinations can be stored in one program. • A program in which sub addresses and passcodes are specified as an F-code destination records all sub addresses and passcodes. This section explains how to enter a destination from the initial screen of normal mode. EASY MODE (page 5-6) 1 Place the original. According to the function stored in the program, place the original in the document feeder tray of the automatic document feeder, or on the document glass. AUTOMATIC DOCUMENT FEEDER (page 1-30) DOCUMENT GLASS (page 1-34) 2 Tap [Call Program] on the action panel. 3 Address Book Address Fax Number Call Program OK Call registered settings when touched. Pre-Setting Program 01 Program01 02 02 03 03 04 04 05 05 06 06 07 07 08 08 09 09 10 10 Others reception memory: 100% Tap the desired program key. 4 Configure additional settings as required. Some settings cannot be added depending on the contents of the called program. 5 Tap the [Start] key to start scanning of the original. If you inserted the original pages in the document feeder tray, all pages are scanned. When you place the original on the document glass, scan each page one at a time. After you have scanned the last original, tap the [Read-End] key. A beep will sound to indicate that scanning and transmission have ended. You can tap the [Preview] key to check a preview of the image before sending a fax. For more information, see "FAX TRANSMISSION METHODS (page 5-29)". 5-75