Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 442
Set The Scanning Of The Originals
![]() |
View all Sharp BP-70C45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 442 highlights
FACSIMILE►BASIC TRANSMISSION METHODS SET THE SCANNING OF THE ORIGINALS This section explains how to enter a destination from the initial screen of easy mode. EASY MODE (page 5-6) AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) The automatic document feeder will automatically scan both sides of the document. For example, a 2-sided original can be scanned, and its front and back sides can be sent as 2 pages. • 2-sided scanning is not possible when direct transmission or speaker transmission is performed. • On the BP-50C26/BP-50C31/BP-50C36/BP-50C45, duplex scanning is not possible when originals of mixed width are scanned. • You cannot use 2-sided scanning when the original size is set to Long Size. • 2-sided scanning is not possible when "Settings (administrator)" - [System Settings] → [Common Settings] → [Device Control] → [Condition Settings] or [Enable/Disable Settings] → [Disabling of Document Feeder is enabled. 2-sided scanning automatically turns off after transmission has ended. 1 (1) (2) Tap the [Original] key, and tap the [Book] key or [Tablet] key. AJ E C GL AB EF KL See the figure on the left to check the binding edge of the original and select the key to be tapped. (1) Book (2) Tablet In normal mode, tap the [2-Sided Booklet] key or [2-Sided Tablet] key. 5-42
![](/manual_guide/products/sharp-bp50c26-color-advanced-essentials-bp-series-operating-manual-9e53f11/442.png)