Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 932

SETTING MODE►SYSTEM SETTINGS DNS Settings IPv4 Settings Primary Server Enter the IP address of primary DNS server. Secondary Server Enter the IP address of secondary DNS server. IPv6 Settings Primary Server Enter the IP address of primary DNS server. Secondary Server Enter the IP address of secondary DNS server. Domain Name Enter the domain name where the selected DNS server exists. Dynamic DNS Updating Set this option to use the dynamic updating of DNS server. Factory default settings: Disable IEEE802.1X Setting IEEE802.1X can be used to authenticate a user to allow use of the machine. IEEE802.1X protocol defines port-based authentication for both wired and wireless networks. Use IEEE802.1X authentication to allow only authenticated devices to use network, and protect against network abuse by third parties. Depending on the Web page settings, connection to the machine may not be allowed, or the settings may not allow printing, scanning, or Setting mode (Web version) display. In this case, deselect this setting and change the Setting mode (Web version) settings. IEEE802.1X Authentication/IEEE802.1X Authentication (Wired) Set whether to use authentication using IEEE802.1X. Factory default settings: Disable EAP Authentication Method Set the EAP authentication method in IEEE802.1X. Factory default settings: EAP-TLS EAP User Name Enter the EAP user name when authenticating. Password Enter the EAP password for authentication. Server Authentication Set whether to use server authentication. Factory default settings: Enable EAP Timeout Set the EAP timeout. Factory default settings: 10 seconds 9-158