Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 834
Auto Selection Setting of Tray that is Supplied the Paper
![]() |
View all Sharp BP-70C45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 834 highlights
SETTING MODE►SYSTEM SETTINGS Disabling of Bypass-Tray in Duplex Copy Disables the use of the bypass tray when making 2-sided copies. The bypass tray is often used to feed label sheets, transparency film, and other special media for which 2-sided copying is prohibited. If a sheet of one of these special media enters the reversing unit, a misfeed or damage to the unit may result. If special media for which 2-sided copying is prohibited is often used, it is recommended that you enable this setting. Factory default settings: Disable Disabling of Auto Paper Selection Disables the Auto Paper Selection function. When this setting is enabled, automatic selection of paper that is the same size as the original on the document glass or in the automatic document feeder does not take place. Factory default settings: Disable Auto Selection Setting of Tray that is Supplied the Paper When this setting is enabled and paper is loaded into a tray while the machine is on standby in copy mode, that tray is automatically selected. Factory default settings: Disable Disabling Registration of Custom Image Disables storage of a custom image. Factory default settings: Disable Disabling sending while copying Disables the Image Send function during copy. Factory default settings: Disable High Quality Scan from Document Feeder (B/W) The resolution for copying in black and white using the automatic document feeder can be changed from 600 x 400 dpi to 600 x 600 dpi (high quality mode). When high quality mode is used, fine print and thin lines are reproduced with greater clarity, however, the scanning speed is slower. Factory default settings: Enable When high quality mode is not selected, the following conditions must be satisfied in order to scan at 600 x 400 dpi and attain the fastest speed. • The copy ratio must be set to 100%. • Do not select a special mode that will change the ratio. • [Copy of Copy] must not be enabled. • Do not copy in black and white with the [Color Start] key. 9-60
![](/manual_guide/products/sharp-bp50c26-color-advanced-essentials-bp-series-operating-manual-9e53f11/834.png)