Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 1047

APPENDIX►SPECIFICATIONS Finisher (Large stacker) / Saddle Stitch Finisher (Large stacker) Name Paper sizes Useable paper No. of trays Tray capacity (60-80g/m2 (13-20 lbs. bond))*1 Max. no. of stapled sheets Staple position Manual staple Saddle Stitch (BP-FN16) Required power supply Weight Dimensions Finisher (BP-FN15) Saddle Stitch Finisher (BP-FN16) Depends on feeder specifications Paper weight 13 lbs. to 110 lbs. Cover (55 g/m2 to 300 g/m2) BP-FN15: 2 (Upper tray / Lower tray) BP-FN16: 2 (Upper tray / Lower tray) + Saddle stitch tray Upper tray Non-stapled 12" × 18", 11" × 17", 8-1/2" × 14", 8-1/2" x 13", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" × 11"R, 7-1/4" × 10-1/2"R  (SRA3, SRA4, A3W, A3, B4, A4R, B5R): 125 sheets 8-1/2" × 11", 5-1/2" × 8-1/2"R (A4, B5, A5, A5R): 250 sheets Z-Fold/Half Fold*2 11" × 17", 8-1/2" × 14", 8-1/2" x 13-2/5" (A3, B4): 30 sheets 8-1/2" × 11"R (A4R): 20 sheets Lower tray Non-stapled A6R: 750 sheets 12" × 18", 11" × 17", 8-1/2" × 14", 8-1/2" x 13", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" × 11"R, 7-1/4" × 10-1/2"R,  5-1/2" × 8-1/2"R (SRA3, SRA4, A3W, A3, B4, A4R, B5R, A5, A5R): 1500 sheets 8-1/2" × 11" (A4, B5): 3000 sheets Staple function 11" × 17", 8-1/2" × 14", 8-1/2" x 13", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" × 11"R (A3, B4, A4R): 100 units or 1500 sheets 8-1/2" × 11" (A4, B5): 200 units or 3000 sheets Stapleless staple function 11" × 17" (A3): 100 units 8-1/2" × 11" (A4): 200 units Z-Fold/Half Fold*2 11" × 17", 8-1/2" × 14", 8-1/2" x 13-2/5" (A3, B4 ): 30 sheets 8-1/2" × 11"R (A4R): 20 sheets Saddle stitch tray (MX-FN31) 12" × 18", 11" × 17", 8-1/2 × 14", 8-1/2" x 13", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",8-1/2" × 11"R (A3W, A3, B4, A4R): 10 units (20 sheets) • Offset output is not available for 12" × 18",  7-1/4" × 10-1/2"R, 5-1/2" × 8-1/2"R, SRA3, SRA4, A3W, B5R, A5, A5R, A6R. • Offset output is not available when using the half folding function. Also, when 8-1/2" x 11"R (A4R) is Z-folded, offset paper discharge is not possible. Staple: Max. no. of 65 sheets (8-1/2" × 11" (A4, B5)) Max. no. of 2 sheets (110 lbs. Cover (300 g/m2)) + 63 sheets (24 lbs.(90 g/m2 )) Max. no. of 30 sheets (11" × 17", 8-1/2" × 14", 8-1/2" x 13", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 11"R (A3, B4, A4R)) Stapleless Staple: Max. no. of 10 sheets (8-1/2" × 11" (A4, B5)) (16 lbs Bond (64 g/m2)) Max. no. of 5 sheets (11" × 17" (A3, B4)) (16 lbs Bond (64 g/m2)) 1 bottom (Slanting), 1 top (Slanting), 2 middle Staple position: 1 top (Slanting) Max. no. of stapled sheets: 23/64" (9 mm) or less Staple method (for saddle stitch) Centered fold with stapling in 2 center places Saddle stitch fold position Centered fold Saddle usable sizes 12" × 18", 11" × 17", 8-1/2 × 14", 8-1/2" x 13", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" × 11"R (A3W, A3, B4, A4R) Saddle usable paper weight 13 lbs. to 140 lbs. Index (55 g/m2 to 256 g/m2) Paper weighting 28 lbs. to 140 lbs. Index (106 g/m2 to 256 g/m2 ) is only able to be used in cover mode and for single sheet fold. Max. no. of saddle-stitched sheets Max. no. of 20 sheets (20 lbs. (80g/m2)) 19 sheets (20 lbs.(80g/m2 )) + 1 sheet (140 lbs. Index (256 g/m2)) Supplied from main machine BP-FN13: Approx. 68.4 lbs. (31 kg) BP-FN14: Approx. 119.1 lbs. (54 kg) When output paper tray is stored 21" (W) x 24-5/8" (D) x 38-7/8" (H) (533 mm (W) x 623 mm (D) x 986 mm (H)) When output paper tray is extended 25" (W) x 24-5/8" (D) x 41-3/8" (H) (635 mm (W) x 623 mm (D) x 1049 mm (H)) *1: Output capacity may vary depending on environmental conditions at the installation location, the type of paper used, and the storage condition of the paper. *2: When the folding unit is installed. *3: When the folding unit is installed, B5 size paper weight is up to 256g/m2. Punch Module Name Punch module for BP-FN11/FN12 MX-PN14B, Punch module for BP-FN13/FN14 MX-PN15B, Punch module for BP-FN15/FN16 MX-PN16B, Paper size for punch module 11" × 17" to 7-1/4" × 10-1/2"R (A3 to B5R) Holes MX-PN14B/PN15B/PN16B:2/3 holes Required power Supplied from main machine supply Dimensions (Built into the Finisher and Saddle Stitch Finisher) Weight Approx. 6 lbs.  (2.7 kg) Approx. 3.7 lbs.  (1.7 kg) Approx. 5.6 lbs.  (2.5 kg) * Some options may not be available in some countries and regions. Paper Pass Unit Name Dimensions Weight Paper Pass Unit (BP-RB10) 17-3/4" (W) × 20-43/64" (D) × 6-1/2" (H) (449 mm (W) × 525 mm (D) × 165 mm (H)) Approx. 9.9 lbs. (4.5 kg) Folding Unit Name Folding unit (BP-FD10) Folding types Z-Fold, C-Fold, Accordion Fold, Half Fold. Useable size for folding unit Z-Fold, Half Fold: 11" x 17", 8-1/2" x 14", 8-1/2" x 11"R, A3, B4, A4R C-Fold, Accordion Fold, Half Fold: 11" x 17", 8-1/2" x 11"R, A3, A4R Useable paper 16 lbs bond to 28 lbs bond (64 g/m2 to 105 g/m2 ) Tray capacity (80 g/m2 (20 lbs)) Z-Fold/Half Fold 11" × 17", 8-1/2 × 14", 8-1/2" x 13-2/5", 8-1/2" × 11"R (A3, B4, A4R): 20 sheets C-Fold/Accordion Fold 11" × 17", 8-1/2 × 14", 8-1/2" x 13-2/5", 8-1/2" × 11"R (A3, A4R): 20 sheets Required power Supplied from the machine supply Dimensions 24-7/32" (W) x 21-13/16" (D) x 8-23/64" (H) (615 mm (W) x 554 mm (D) x 210 mm (H)) (when extension tray is stored) 28-9/32" (W) x 21-13/16" (D) x 10-9/16" (H) (718 mm (W) x 554 mm (D) x 268 mm (H)) (when the extension tray is extended) Weight Approx. 33.1 lbs (15 kg) Utility table Name Utility table (BP-UT10) Dimensions 11-13/16" (W) × 16-35/64" (D) × 2-23/32" (H) (300 mm (W) × 420 mm (D) × 69 mm (H)) Weight Approx. 1.8 lbs. (0.8 kg) * Do not place anything that weighs more than 5 kg or otherwise apply a load. Do not place a container that contains water or other liquid. Risk of fire and electrical shock if the liquid spills and enters the machine. Working on the table while the machine is in operation may cause poor image quality or other problems. 11-5