Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 443

FACSIMILE►BASIC TRANSMISSION METHODS 2 Original Size Image Orientation Auto Tap the [Image Orientation] key with OK the same orientation as the placed original. Duplex Setup 1-Sided Book Tablet If this setting is not correct, a suitable image may not be transmitted. After the settings are completed, tap . To cancel 2-sided scanning: Tap the [1-Sided] key. In normal mode, tap the [2-Sided Booklet] key or the [2-Sided Tablet] key that has been forcibly displayed and cancel the display. AUTO DETECTION When the original is placed, its size is automatically detected. In normal mode, the size of the placed original is shown as the "Scan Size" and the transmission size is shown as the "Send Size" in the initial screen. Address Book Address Fax Number Exposure Resolution Original Auto Super Fine Job Build 1 23 ABC DEF 456 GHI JKL MNO 789 PQRS TUV WXYZ Slow Scan Mode 0#C Heavy Paper Scan Mixed Size Orig. Original Count Others R Scan Size Auto 100% 8½x11 reception memory: Send Size Auto 8½x11 100% In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. For example, if the scan size is 8-1/2" x 11" (A4) and the send size is 5-1/2" x 8-1/2" (B5), the image will be reduced before transmission. 8-1/2" x 11" (A4) 5-1/2" x 2-1/2" (B5) • Only standard original sizes can be automatically detected. NORMAL MODE (page 3-5) • When the original size is an inch size or a non-standard size, or if the size is not detected correctly, manually specify the original scan size. SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE (page 5-44) SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 5-46) 5-43