Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 878

SETTING MODE►SYSTEM SETTINGS Enable SSL/TLS Allows the POP over SSL/TLS communication or the POP over TLS communication by STLS command. This requires the server to support the POP over SSL/TLS communication or the STLS command. To allow the POP over SSL/TLS communication, set the "Port Number" to the POP over SSL/TLS communication port number. To allow POP over TLS communication, set the "Port Number" to the same port number as for the normal POP3 communication. Factory default settings: Disable Connection Test Tap the [Execute] button to test the connection to the POP3 server. Default Settings Own Number and Name Set Set I-Fax Own Name Enter the name of the sender when sending an Internet fax. Set I-Fax Own Address Enter the source address when sending an Internet fax. Direct SMTP Settings Port Number (Receive), Port Number (Send) Specify the port number used for transmission and reception by direct SMTP. Factory default settings: 25 Timeout Set the wait time until transmission or reception is canceled when a response is not received from the server during direct SMTP transmission/reception. Factory default settings: 300 seconds 9-104