Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 904

SETTING MODE►SYSTEM SETTINGS Paper Settings Paper Tray Settings Paper tray and paper type settings are explained in this section. These settings specify the paper type, paper size, and functions allowed for each paper tray. When the [Tray Settings] key is tapped, a list appears showing the trays and the current settings. Auto Tray Switching When a tray runs out of paper during printing, this determines whether or not another tray with the same size and type of paper is automatically selected and printing continues. Factory default settings: Disable Display Paper Tray Settings when bypass tray detects paper. You can have the paper tray settings appear automatically when paper is detected in the bypass tray. Factory default settings: Disable Paper Weight These are used to control the toner fusing temperature according to the weight of the paper. These settings apply to recycled paper, punched paper, pre-printed paper, letterhead paper, colored paper, and user type paper. Enter "/". You can select "60g/m2 to 89g/m2" or "90g/m2 to 105g/m2" ("16 to 23 lbs." or "23+ to 28 lbs."). Factory default settings: : 60 to 89g/m2 (16 to 24 lbs) Settings of each tray When the [Change] key is tapped, the corresponding setting screen appears. The following settings can be configured. List name Description Type Size Feeding Approved Job Select a type of paper to be loaded into the tray. The paper types that can be selected vary by paper tray. For more information see "Tray Settings (page 9-131)". To user type setup, see "Paper Type Registration (page 9-134)". Select the paper size from the list. The paper sizes that can be selected vary by tray. The sizes that can be selected may also be restricted by the paper type selected above. For more information see "Tray Settings (page 9-131)". If the desired size does not appear in the list, select [Custom Size] and directly enter the size (only for the bypass tray). For more information see "Tray Settings (page 9-131)". Select the modes that can be used. If there is a function that you do not wish to be used with the selected tray, disable the function. When the "Type" is other than plain paper, recycled paper, colored paper, or a user type, [Fax] and [Internet Fax] cannot be selected. 9-130