Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 875

SETTING MODE►SYSTEM SETTINGS Receive Settings Configures the settings for Internet fax. Auto Receive Reduce Setting When a fax is received that includes printed information such as the sender's name and address, the received image is slightly larger than the standard size. This setting is used to automatically reduce the image to fit the standard size. Factory default settings: Enable If Auto Receive Reduce is disabled, the edges of the image outside the standard size will be cut off. However, the image will be clearer because it will be printed at the same size as the original. Standard sizes are sizes such as 8-1/2" x 11" and 5-1/2" x 8-1/2"(A4 and B5). 2-Sided Printing of Received Data This is used to have received faxes printed on both sides of the paper. When this setting is enabled and a fax consisting of 2 or more pages is received (the pages must be the same size), the pages are printed on both sides of the paper. Factory default settings: Disable Set Address for Data Forwarding When the machine cannot print a received fax, the fax can be forwarded to another machine. This setting is used to configure the address of the other machine. Forwarding to Enter the forwarding address (maximum of 64 characters). Direct SMTP Select this to enable forwarding when direct SMTP is used. Factory default settings: Disable Add Hostname or IP Address. Select this to separately enter a host name or IP address. Factory default settings: Disable Hostname or IP Address Use this setting when "Add Hostname or IP Address." is enabled. Enter the host name or IP address (maximum of 64 characters). Multiple forwarding addresses cannot be stored. Letter Size RX Reduce Print This program is available in Canada and Philippines. When a letter-R (8-1/2" x 11"R) size fax is received, this setting reduces the fax to A4R size. When this setting is enabled, A4R size faxes are also reduced. Factory default settings: Disable 9-101