Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 605

SCANNER/ INTERNET FAX►OTHER FUNCTIONS SCANNING ORIGINALS OF DIFFERENT SIZES (MIXED SIZE ORIGINAL) Scan originals of different sizes at the same time; for example, when 8-1/2" x 14" (B4) size originals are mixed together with 11" x 17" (A3) size originals. When scanning the originals, the machine automatically detects the size of each original. 8-1/2" x 14" (B4) 11" x 17" (A3) 8-1/2" x 14" (B4) 11" x 17" (A3) This function can only be used with the combinations of original sizes as shown below. • 11" x 17" and 8-1/2" x 14", 11" x 17" and 8-1/2" x 13", and 11" x 17" and 5-1/2" x 8-1/2" • A3 and B4, A3 and B5, B4 and A4, and A4 and B5 • A4R and B5, B4 and A4R, B4 and A5, and B5 and A5 • A3, B4 and A4R, A3, B4 and A5, A3, A4R and B5, A3, B5 and A5, B4, A4R and A4, B4, A4 and A5, A4, A4R and B5, A4, B5 and A5 • B4, A4R and B5R, B4, B5R and A5, A4R, B5R and B5, B5, B5R and A5 Three Different Widths cannot be selected on BP-50C26/BP-50C31/BP-50C36/BP-50C45/BP-50C55/BP-50C65. • On the BP-50C26/BP-50C31/BP-50C36/BP-50C45/BP-50C55/BP-50C65, two sided scanning cannot be used when scanning originals of mixed width as in the above. • Mixed size scanning is not possible when "Settings (administrator)" - [System Settings] → [Common Settings] → [Device Control] → [Condition Settings] or [Enable/Disable Settings] → [Disabling of Document Feeder] is enabled. • When Mixed Size Original is selected, an original scan size cannot be specified. • After the original scan size has been selected, Mixed Size Original cannot be specified. • Rotate cannot be used when Mixed Size Original is enabled. • This function is not available if [System Settings] → [Common Settings] → [Device Control] → [Condition Settings] → [Original Size Detector Setting] is set to "AB-3" in "Settings (administrator)". 1 Place the original in the document feeder tray of the automatic document feeder. 8-1/2" x 14" (B4) 11" x 17" (A3) 11" x 17" (A3) 8-1/2" x 14" (B4) Insert the originals with the corners aligned together in the far left corner of the document feeder tray. When in fax mode, then after completing this procedure, proceed to Step 3. AUTOMATIC DOCUMENT FEEDER (page 1-30) 2 Tap the mode display to switch to the initial screen of each mode. CHANGING MODES (page 2-10) 6-99